Off Roading

Off Roading

Artiklar 1 till 10 av totalt 132

per sida

Sida:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • RAM 2.5" Round Ball Base with the AMPs Hole Pattern & 1" Ball

    The RAM-B-202U consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPs hole pattern. Läs mer
  • RAM Double Socket Arm for 1" Balls(Overall Length: 3.69")

    The RAM-B-201U, STANDARD length double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

    Dimensions:
    Overall Length: 3.69"
    Socket-To-Socket Length: 3" Läs mer
  • RAM Short Double Socket Arm for 1" Balls(Overall Length: 2.38")

    The RAM-B-201U-A, short double socket arm, has a socket at both ends that accommodates 1" ball bases. RAM socket technology allows for almost infinite adjustment and perfect viewing angles.

    (This product does not include single spring)

    Dimensions:
    Overall Length: 2.38"
    Socket-To-Socket Length: 1.75" Läs mer
  • RAM 2.43" x 1.31" Diamond Ball Base with 1" Ball

    The RAM-B-238U consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. Läs mer
  • RAM Long Double Socket Arm for 1" Balls(Overall Length: 6")

    The RAM-B-201U-C, long double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

    Dimensions:
    Overall Length: 6"
    Socket-To-Socket Length: 5.25" Läs mer
  • RAM Universal X-Grip® Cell/iPhone Cradle

    Optional Tether Included

    Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phone and become the most useful accessory in your vehicle.

    The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

    Cradle Dimensions
    Minimum Width = 1.875" (Minimum Height = 4.25")
    Maximum Width = 3.25" (Minimum Height = 2.25")
    Depth = 0.875"

    Patented

    Läs mer
  • RAM Universal X-Grip® Large Phone/Phablet Cradle

    Optional Tether Included
    The RAM-HOL-UN10BU has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the X-Grip® IV is the phablet cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle.

    The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

    Cradle Dimensions
    Minimum Width = 1.75" (Minimum Height = 5.5")
    Maximum Width = 4.5" (Minimum Height = 3.25")
    Depth = 0.875"

    Patented Läs mer
  • RAM Small Tough-Claw™ with 1" Diameter Rubber Ball

    The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.

    Patent Pending Clamping Range (Rail/Tube Surfaces):
    0.625" to 1.5"

    Clamping Range (Flat Surfaces):
    0" to 1.14" Physical Dimensions:
    Height: 4.25"
    Width: 1.18" Läs mer
  • RAM Rail Base with Zinc Coated U-Bolt & 1" Ball for Rails from 0.5" to 1.25" in Diameter

    The RAM-B-231ZU consists of a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".

    U-Bolt Dimensions:
    Accommodates rails from 0.5" to 1.25" in diameter. Läs mer
  • RAM Custom GoPro® Hero Adapter

    GoPro® cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro® line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro® make it possible to truly “Be a HERO™”.

    The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Läs mer

Artiklar 1 till 10 av totalt 132

per sida

Sida:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5